Features
- Features
- 8 ports of 1Gbps or one 10Gbps conductivity
- 1024 Virtual Volumes (256 per initiator)
- Friendly HTTP based management
- Over 400 Megabytes per Second
- Benefits
- Works on virtually any network
- Volume Virtualization
- Ultra High Performance
- Technologies
- i240 ASIC Optimizes iSCSI via TCP/IP full offload, with advanced cache management & Jumbo Frames support
- QoS Management Tools support
The INLINE i240 iSCSI appliance is a high performance storage controller solution. Built for high-performance, feature-rich, cost-effective iSCSI RAID storage solutions the i240 enables the opportunity to create a block-based, cost-effective, RAID storage solution by deploying the industry’s latest technology — iSCSI with the i240 forward looking technology.
At the heart of the i240 is an integrated, high performance, 10GbE i240 board with an iSCSI/TCP/IP offload Application Specific Integrated Circuit (ASIC) with embedded processors running a fully featured, integrated storage-virtualization firmware stack? The i240 offers, features such as Media Protection, Caching, Redundancy, End-to-End data protection, and RAID. Serial ATA disk channels enable compelling block-based networked storage solutions such as near line storage, disk-to-disk backup, DAS replacement along with high-capacity, cost-effective primary storage. Each i240 storage controller can support up to 12 Serial ATA disk drive interfaces assuring data integrity with Diskline and Micro Rebuilds.
Today's data-rich business environments present unique challenges for storage managers. Prioritizing the demands of applications, performance requirements, capacity, management tools and cost can be a daunting undertaking and far too often it results in an inefficient and unnecessarily expensive solution that is already outdated before it is even fully implemented.
Technical Specifications |
General Information |
|
Dimensions |
External Interface |
Eight 1.0 Gbps NIC or one 10.0 Gbps |
|
Height |
19” / 87.9mm (2 EIA Units) |
Supported Operating Platforms |
Windows 2003 (IA32, EM64T, IA64); RedHat Linux AS3/AS4 (IA32, EM64T, IA64); SuSE Linux 8/9 (IA32, EM64T, IA64), Solaris 10) |
|
Width |
17..4” / 443.7mm (1EC Rack compatible) |
Depth |
24.56” / 625mm |
Host Port Connectivity |
RJ-45 / 10 Gbit Ethernet SFP |
|
Weight |
312.2Kg (71 lbs.) with 12 drives installed |
Max Cache |
4GB |
|
Electrical: AC Input |
Total Capacity |
12TB |
|
Voltage |
100-240V AC @ 50/60Hz. Single Phase |
Input Current |
6.0A (115V AC), 3.0A (230V AC) |
Disk Drives |
|
Input Power |
300W Typical |
Disk Drives Supported |
500, 750 - GB & 1TB SATA II |
|
Environmental: Operating |
Interface Types Supported |
SATA-II (3Gb) dedicated bandwidth to each drive |
|
Temperature |
0 to 50° C (32ºF to 122ºF) |
Max Drives |
12, 512 Logical Drives/system |
|
Humidity |
20% to 80% @23° C (73.4 ºF) non-condensing |
RAID Controllers |
|
Altitude |
0 to 3,0480m (0 to 10000’) |
No. RAID Controllers |
1 (single) |
|
Shock |
5g 10ms ½ Sine |
RAID Levels Supported |
Up to 60 disks with independent RAID level 0, 1, 5, 6, 10, and 50 support, selectable strip sizes (64, 128, & 256K) |
|
Vibration |
Random: 0.21 grms 5-500Hz Random |
Enterprise SAN Features |
RAID technology, Hot-Spare Auto-Rebuild, Battery-backed cache |
|
Acoustics |
<58dB LpA @20º C |
System Management |
|
Environmental: Non-Operating |
Advanced System Monitoring |
Disklines: location protection (LBN tagging),
content protection (CRC), Forced Error
support (controller enabled flags) and
IP-SAN Device Manager |
|
Temperature |
1º to 50ºC (33.8º to 122º F) |
Advanced System Status Notification |
IP-SAN Device Manager,
Front Mount LEDs, SMI-S |
|
Humidity |
> 80% non-condensing |
System Availability |
|
Altitude |
>3,0480m ( 10000’) |
Hot Swappable Components |
Hot-Swappable, fault-tolerant enclosure,
disks, PSU and fans |
|
Shock |
30g 10ms ½ Sine |
|
|
|
Vibration |
Random: 1.04 grms 2-200Hz |
Approvals and Certifications |
UL and cUL listed. Tested to UL 60950-1. FCC Class A Certified body report and certificate to IEC60950-1. CE marked to the requirements of low voltage directive 73/23/EEC and the electromagnetic compatibility directive 89/336/EEC. |
|